-
- STEP 101 > Press the RIGHT SIDE against your BOTTOM "F" front bar as well as sliding it into it's white guide box.
-
- STEP 102 > Make sure the bottom edges are as FLUSH as they can be (red arrows).
-
- STEP 103 > Once secure, we can move onto the bottom front "H" template piece. Place a line of hot glue INSIDE the white guide box and UP the rear end of your "G" piece underside.
-
- STEP 104 > As before, you want it to be FLUSH with the "G" connection (red arrows) and front side edges (green arrows).
-
- STEP 105 > Make sure the bottom edges align properly to avoid your console to shake unevenly when placed in your diorama.
-
- STEP 106 > Time to hot glue the underside "I" or foot if you will. Small amount INSIDE the white guide box and UP the rear back side of your "H" piece.
-
- STEP 107 > Slide your "I" template piece along the white guide box until it makes contact with your "H" corner surface (red arrows). Make sure all is FLUSH, yo know the drill by now.
-
- STEP 108 > Now we can apply the rear wall. Put some hot glue along the bottom white guide box as well as the TOP and BOTTOM rear "J" and "I" template pieces (red arrows).
-
- STEP 109 > Start by sliding your rear template against the bottom "I" piece. After they connect, bring in the TOP until it connects with the "J" template piece and the full side surface as well.
-
- STEP 110 > You want to have the rear end backside FLUSH with the rear piece edges (red arrows).
-
- STEP 111 > Wiggle the rear until it gives you a nice clean smooth connection..
-
- STEP 112 > You can now grab your opposite side piece and do a DRY RUN.
-
- STEP 113 > Place it on top of your sides and everything should line up perfectly.
-
- STEP 114 > You have to act quickly to get all of the hot glue placed all around the edges before it cools down. The best way to achieve this is to put drops of hot glue instead of straight lines.
-
- STEP 115 > Then place your opposite body side piece on top of the edges and lower until you start matching up and getting smooth FLUSH connections. Most important are the edge alignments of your "F" front lip piece and "B" front top pieces.
-
- STEP 116 > If by any chance the rear isn't fully lined up we can trim that with our X-Acto knife before applying the decals.
-
- STEP 117 > With the Console "A" Body complete, let's move onto the chairs. Start by placing some hot glue along one of the SIDES of your CHAIR TEMPLATE BACK balsa wood piece.
-
- STEP 118 > Place it onto one of your foamie chair sides inside it's white guide box.
-
- STEP 119 > We now can attach the seat piece. Make sure the word "chair" is your TOP and where it will connect with your BACK.
-
- STEP 120 > Put some hot glue along the LEFT SIDE and the TOP (where the word "chair" is closest.
.
Did you already build this Diorama ? At home or at our Star Wars Celebration Diorama Builders workshop ? Would you like to show it in the site’s GALLERY VISITORS DIORAMAS section, YES ? That is Awesome !!! You can find out all the details on how to email me your photos on the VISITORS SUBMISSIONS INFO page … When I get your photos, I will create your very own page just like this one. You may not realize it but work does inspire others to join in the fun of making Action Figure Dioramas.
.
NOT FOR RESALE ALL Decals, tutorials and artwork are ©FrankDiorio (dioramaworkshop.com) and offered FOR FREE to the fans – that would be you ? so you can build and display my diorama designs in your very own home. I realize I cannot control what one does with my graphics once I place them on the web, I can only ask you as one fan to another, please respect the artist and do not be that jerk who uses my designs and tutorials to build a copy of my work only to sell it on EBAY or trade/sale groups and forums. Thank You. Frank.
.
.
.
If you have a facebook account, why not join the Official Diorama Builders Fan Club today, simply click the logo link below.
.
Catch up with fellow visitors and exchange stories, read cool interviews with the crew, exchange photos, fun surprises and grab some FAN ONLY merchandise next year at actual future conventions ?
.
©2021 Frank Diorio DioramaWorkshop.Com
.
IF YOU LIKE WHAT YOU SEE, PLEASE SHARE WITH YOUR FRIENDS
USING THE SOCIAL MEDIA BUTTONS BELOW